100 ft 3/8" 4800 PSI Pressure Washer Hose Non-Marking Gray With

100' x 3/8" Non-Marking 4800psi High Pressure Washer Hose With Quick Couplers Installed - Super Abrasive Resistant Cover For Use With Your Hot or Cold Water High Pressure Washer!

 

Fits All Popular of Hot and Cold Water Pressure Washers:

 

description:  

100 ft 3/8" 4800 PSI Pressure Washer Hose Non-Marking Gray With Couplers

100' x 3/8" Non-Marking 4800psi High Pressure Washer Hose With Quick Couplers Installed - Super Abrasive Resistant Cover For Use With Your Hot or Cold Water High Pressure Washer!

 

Fits All Popular of Hot and Cold Water Pressure Washers:

 

description:
 

• Extremely Flexible Grey Non-Marking Cover
• 3/8" Male Thread Solid End X 3/8" Male Thread Swivel End
• Quick Connector Socket & Plug Installed
• 6'' Hose Guards w/ bend restrictors
• Extra steel wire for additional density
• Super Oil Resistant
• Tough Cover for extra protection & durability
• Extremely Flexible Grey Non-Marking Cover
• For Use With Hot Or Cold Water Washers

 

Product Introduction：

This high-pressure washer hose is 100 feet long, with a diameter of 3/8 inches, capable of withstanding pressures up to 4800 psi and designed to be non-marking to prevent scratches or marks on surfaces.
 

Instructions for Use:
 

1. Installation Steps

• Connect the Hose: Connect one end of the hose to the water outlet of the pressure washer and the other end to the nozzle or cleaning tool.
• Ensure Sealing: Check that the connection points are tight to avoid leaks.

2. Operating Steps

• Preparation: Ensure that the power supply and water source of the pressure washer are properly connected, and inspect the hose for any damage.
• Start the Pressure Washer: Open the water valve, then start the pressure washer. Let the machine run for a few minutes to reach optimal operating conditions.
• Select Nozzle: Choose the appropriate nozzle based on your needs (e.g., use a narrow nozzle for heavy-duty cleaning, and a wide fan nozzle for large area coverage).

3. Usage Tips

• Maintain Distance: Keep a distance of 12-24 inches from the surface while cleaning to prevent damage.
• Move Evenly: Maintain a consistent moving speed during cleaning, avoiding staying in one spot for too long.
• Regular Checks: Periodically check the hose for cracks or leaks during operation to ensure safe use.

4. Cleaning and Maintenance

• Post-Cleaning Procedure: After use, drain the water from the hose and rinse it thoroughly to avoid clogging.
• Proper Storage: When storing, coil the hose neatly without folding or pinching, and keep it in a cool, dry place.

5. Precautions

• Temperature Limitations: This hose is designed for hot water, but please do not exceed the safe temperature range (typically not over 200°F).
• Pressure Limitations: Do not exceed the pressure of 6000 psi to avoid damaging the hose.
• Personal Protective Equipment: Always wear safety goggles, gloves, and other necessary protective gear while operating.

 

Frequently Asked Questions

Q: Can this hose be used for cold water cleaning?

A: Yes, although this hose is specifically designed for hot water, it can also be safely used for cold water cleaning.

Q: What should I do if I notice a leak?

A: Check that the connections are tightened; if it still leaks, stop using it and check if the hose is damaged.

Hot Sale：

Item SpecificsBrand :autoutdoorManufacturer Part Number :ADD17164136RWarranty :1 YearMaximum Pressure :4800 psiHose Diameter :3/8"Item Length :100ftHose Length :100ftColor :GrayType :Cold or Hot Water Pressure WasherStyle :Non-MarkingCustom Bundle :NoCondition :New
Payment

We will only ship to the confirmed shipping address given with the payment.

We do not offer local pickups.

Shipping

1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

2. The images shown are not the actual item and are for your reference only.

3. Fast shipping:All our packages use USPS Package Service

4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

Returns

1. You have 7 days to contact us and 10 days to return it from the date it was received.

2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

Contact Us

We are always been trying to provide best service and reliable products for every customer.

If you are satisfed with the product you recieved,please leave us positive feedback.

If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

Shop Category Store Home  Brake Rotors & Pads ◈  Brake Pads  suspension kit ◈  suspension kit-chenjiao ◈  suspension kit-fu ◈  suspension kit-gxy ◈  Suspension Kits  Exterior ◈  Spoilers & Wings ◈  Body Kits ◈  Body Moldings & Trims  Turbos & Parts  Axle Housings & Parts  Motor ◈  Transfer Case Motor ◈  Window Regulator  Water Pump  AC Compressor  PTO Clutch  Deck Rebuild Kit  Garden Water Pump  Tonneau Cover  Car Tools  Oxygen Sensor  Roof Rack  truck box  Timing Belt Kit  Drive Clutch  Cold Air Intake Kit  Head gasket set  timing chain kit  Door Lock Actuator  Sun Visor  RV Awning  Tensioners  Power Steering Pressure  Power Steering Pump  golf  Hydraulic Lifter&Roller Lifter  RV Hose  fuse box  Chisel Chain  Steering wheel hole adapter  Variable Valve Timing  oil pump  Window Visors  valve cover  rocker arms  Cylinder Piston Gasket Kit  Towing mirrors  Tensioner  A/C Refrigerant Discharge Hose  Brake Dust Shield  engine mount  Catalytic Converter  Air Conditioning Bypass Pulley  Pressure Washer Pump  Spindle  Mower Blades  Traction Control Cable  Deck Belt  Titan Ramps  Fuel Filler Neck  Camshaft  Auxiliary Water Pump  Intake Manifold  Tire pressure sensor  Other

Hot Item 48" Deck Rebuild Kit for John Deere L120 L130 L2548 GY20996 GY20050 GY20067 USD 121.82 12v Solar Submersible Water Pump Stainless Steel Deep Well Green Max Head 40m USD 55.40 50ft 4800PSI Pressure Washer Hose Non-Marking 3/8" Couplers Hot&Cold Water 248F USD 59.06 42" Deck Rebuild Kit fits Craftsman Husqvarna Poulan 405143 195945 192870 USD 81.88 Mule Drive Belt 60 Inch Deck for Exmark Lazer Z AS AC LC 103-4014 USD 19.24 New List Item Elertric PTO Clutch for ROTARY 12980 Lawn Mower USD 104.72 Elertric PTO Clutch For SEARS CRAFTSMAN 174367 Lawn Mower USD 104.72 Spindle Assembly for MTD Sears Craftsman ZTL7500 for Cub Cadet 618-04394 USD 23.97 Electric PTO Clutch New For AYP Craftsman Husqvarna 174367 532174367 5215-134 USD 104.72 3pk Spindle Assembly for Cub Cadet 618-3129B 618-3129C 918-3129C 918-3129A USD 55.59 100 ft 3/8" 4800 PSI Pressure Washer Hose Non-Marking Gray With Couplers

100' x 3/8" Non-Marking 4800psi High Pressure Washer Hose With Quick Couplers Installed - Super Abrasive Resistant Cover For Use With Your Hot or Cold Water High Pressure Washer!

 

Fits All Popular of Hot and Cold Water Pressure Washers:

 

description:
 

• Extremely Flexible Grey Non-Marking Cover
• 3/8" Male Thread Solid End X 3/8" Male Thread Swivel End
• Quick Connector Socket & Plug Installed
• 6'' Hose Guards w/ bend restrictors
• Extra steel wire for additional density
• Super Oil Resistant
• Tough Cover for extra protection & durability
• Extremely Flexible Grey Non-Marking Cover
• For Use With Hot Or Cold Water Washers

 

Product Introduction：

This high-pressure washer hose is 100 feet long, with a diameter of 3/8 inches, capable of withstanding pressures up to 4800 psi and designed to be non-marking to prevent scratches or marks on surfaces.
 

Instructions for Use:
 

1. Installation Steps

• Connect the Hose: Connect one end of the hose to the water outlet of the pressure washer and the other end to the nozzle or cleaning tool.
• Ensure Sealing: Check that the connection points are tight to avoid leaks.

2. Operating Steps

• Preparation: Ensure that the power supply and water source of the pressure washer are properly connected, and inspect the hose for any damage.
• Start the Pressure Washer: Open the water valve, then start the pressure washer. Let the machine run for a few minutes to reach optimal operating conditions.
• Select Nozzle: Choose the appropriate nozzle based on your needs (e.g., use a narrow nozzle for heavy-duty cleaning, and a wide fan nozzle for large area coverage).

3. Usage Tips

• Maintain Distance: Keep a distance of 12-24 inches from the surface while cleaning to prevent damage.
• Move Evenly: Maintain a consistent moving speed during cleaning, avoiding staying in one spot for too long.
• Regular Checks: Periodically check the hose for cracks or leaks during operation to ensure safe use.

4. Cleaning and Maintenance

• Post-Cleaning Procedure: After use, drain the water from the hose and rinse it thoroughly to avoid clogging.
• Proper Storage: When storing, coil the hose neatly without folding or pinching, and keep it in a cool, dry place.

5. Precautions

• Temperature Limitations: This hose is designed for hot water, but please do not exceed the safe temperature range (typically not over 200°F).
• Pressure Limitations: Do not exceed the pressure of 6000 psi to avoid damaging the hose.
• Personal Protective Equipment: Always wear safety goggles, gloves, and other necessary protective gear while operating.

 

Frequently Asked Questions

Q: Can this hose be used for cold water cleaning?

A: Yes, although this hose is specifically designed for hot water, it can also be safely used for cold water cleaning.

Q: What should I do if I notice a leak?

A: Check that the connections are tightened; if it still leaks, stop using it and check if the hose is damaged.

Hot Sale：

Item SpecificsBrand :autoutdoorManufacturer Part Number :ADD17164136RWarranty :1 YearMaximum Pressure :4800 psiHose Diameter :3/8"Item Length :100ftHose Length :100ftColor :GrayType :Cold or Hot Water Pressure WasherStyle :Non-MarkingCustom Bundle :NoCondition :New

PaymentShippingReturnsContact Us

We will only ship to the confirmed shipping address given with the payment.

We do not offer local pickups.

1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

2. The images shown are not the actual item and are for your reference only.

3. Fast shipping:All our packages use USPS Package Service

4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

1. You have 7 days to contact us and 10 days to return it from the date it was received.

2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

We are always been trying to provide best service and reliable products for every customer.

If you are satisfed with the product you recieved,please leave us positive feedback.

If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

Copyright of autoutdoor. All rights reserved.